Workshop/3D Printing Custom Phone Cases: Design to Finished Product

3D Printing Custom Phone Cases: Design to Finished Product

This article may contain affiliate links. If you make a purchase through these links, we may earn a small commission at no extra cost to you. This helps us keep creating free content.

3D Printing Custom Phone Cases: Design to Finished Product

A custom 3D printed phone case is one of the most satisfying functional prints you can make. It's useful, it's personal, and it's a project that teaches you CAD design, material selection, and precision printing in a single build. Plus, you can make a case that literally doesn't exist anywhere else, matching your exact phone model with any design, pattern, or text you want.

This tutorial walks you through the entire process from measuring your phone to pulling a finished case off the build plate.

Step 1: Get Your Phone Dimensions

You need accurate dimensions of your phone, not from the manufacturer's spec sheet (those measure differently), but from the actual device. Grab your digital calipers and measure:

3D Printing Custom Phone Cases: Design to Finished Product β€” practical guide overview
3D Printing Custom Phone Cases: Design to Finished Product
  • Length: Top to bottom, including any camera bump
  • Width: Left to right at the widest point
  • Thickness: Back to screen, at the thickest point (usually the camera module)
  • Corner radius: How rounded are the corners? Hold the caliper across the diagonal of each corner and estimate the radius. Most modern phones use 8-12 mm corner radii.
  • Button and port locations: Measure the position and dimensions of power button, volume buttons, charging port, speaker grilles, and camera cutout from a consistent reference point (the bottom-left corner works well).
Pro tip: Download a technical drawing or CAD model of your phone if available. Websites like grabcad.com and printables.com often have accurate phone models uploaded by other designers. Even if you design the case from scratch, having a reference model to test-fit against digitally saves multiple test prints.

Step 2: Design the Case in CAD

πŸ›‘οΈ

OVERTURE High Speed PETG 1.75mm 1kg Black

Black PETG, 1 kg spool, tuned for high-speed printing.

As an Amazon Associate we earn from qualifying purchases.

See on Amazon β†’

Any parametric CAD tool works, Fusion 360, FreeCAD, Onshape, or even TinkerCAD for simple designs. Here's the process in Fusion 360:

Create the phone body: Model a simplified version of your phone using your measurements. It doesn't need to be perfect, just a rectangular block with rounded corners, the correct thickness, and camera bump geometry. This body is your reference tool, not part of the final print.

Create the case shell: Offset the phone body outward by 1.5-2.0 mm on all sides, this is your case wall thickness. For TPU (flexible), 1.5 mm is plenty. For PLA (rigid), use 2.0 mm for impact resistance. The inner dimensions should be the phone dimensions plus 0.3-0.5 mm clearance on each side for easy insertion and removal.

3D Printing Custom Phone Cases: Design to Finished Product β€” step-by-step visual example
3D Printing Custom Phone Cases: Design to Finished Product

Cut the openings: Boolean-subtract cutouts for the screen (the entire front face), charging port, speaker grilles, buttons, and camera module. Add 0.5 mm clearance around each opening to ensure your phone's buttons remain accessible and the camera isn't obscured.

Add a lip: The case needs a 0.8-1.0 mm lip around the screen opening that extends above the phone's screen surface. This lip is what protects the screen when the phone lands face-down. Without it, the case is decorative but not protective.

Add your custom design: This is where creativity comes in. Emboss text, add a geometric pattern, create a textured grip surface, or model a full 3D relief design on the back panel. Keep in mind that any features protruding more than 3 mm from the case surface may catch on pockets.

Step 3: Choose Your Material

TPU (95A Shore hardness), Recommended for daily use. TPU is flexible, impact-absorbing, and grippy. A TPU case protects your phone similarly to commercial silicone cases. It snaps on and off easily, absorbs drops, and doesn't crack. The tradeoff: surface detail is softer than rigid materials, and printing TPU requires a direct drive extruder for reliable results.

3D Printing Custom Phone Cases: Design to Finished Product β€” helpful reference illustration
3D Printing Custom Phone Cases: Design to Finished Product

PLA, For display or light use. PLA produces sharp, detailed prints with crisp text and fine surface features. It's the best choice if your case has intricate designs, logos, or artwork where visual detail matters. The downside: PLA is rigid and brittle. It doesn't absorb impacts, it transfers them to your phone. And PLA cracks on corners after repeated drops. Use PLA cases for display or light daily use, not impact protection.

PETG, Compromise option. PETG is more impact-resistant than PLA but stiffer than TPU. It offers reasonable detail with reasonable protection. The surface tends to be slightly glossy and stringy if your retraction isn't dialed in, so post-processing may be needed for a clean look.

Key insight: If you're selling phone cases (it's a popular Etsy product), TPU at 95A hardness is the standard. Customers expect a flexible case that feels like a commercial product. PLA cases look impressive in photos but generate returns when they crack after the first drop.

Step 4: Print Settings

These settings assume a 0.4 mm nozzle. Adjust for other nozzle sizes accordingly.

TPU settings:

  • Layer height: 0.2 mm (0.16 mm for finer detail on the design surface)
  • Nozzle temperature: 220-230Β°C
  • Bed temperature: 50Β°C
  • Print speed: 25-35 mm/s (slow is essential for TPU, speed causes jams)
  • Retraction: 0.5-1.5 mm at 20 mm/s (direct drive). Disable retraction on Bowden setups.
  • Infill: 15-20% gyroid (flexibility while maintaining structure)
  • Walls: 3 perimeters minimum

PLA settings:

  • Layer height: 0.16 mm (better surface detail for visual designs)
  • Nozzle temperature: 200-210Β°C
  • Bed temperature: 60Β°C
  • Print speed: 60-100 mm/s (standard PLA speeds work fine)
  • Infill: 30-40% (rigidity for protection)
  • Walls: 3-4 perimeters

Step 5: Print Orientation

Print the case standing up, the open screen side facing up. This orientation means the case walls print vertically, giving you the strongest layer adhesion along the direction of impact force. Printing flat (screen opening to the side) creates layer lines parallel to the wall surface, and those layers separate on impact.

Supports are typically not needed if your case design doesn't have overhangs exceeding 45 degrees. The camera cutout and button openings usually bridge cleanly. If you do need supports, use tree supports with 0.15 mm Z-distance for easy removal.

Watch out: Test fit the case on your phone before committing to a full print with complex designs. Print a plain version first, no embossing, no texture, to verify the fit. Adjust clearances if needed, then print the final detailed version. A 30-minute test print saves you from reprinting a 4-hour detailed case that doesn't fit.

Step 6: Post-Processing

TPU cases: Minimal post-processing needed. Trim any stringing with flush cutters. If you want a smoother grip surface, light sanding with 400-grit sandpaper works, but the printed texture is usually pleasant enough as-is.

PLA cases: Sand with 220 then 400 grit if you want a smooth surface. For a glossy finish, apply a thin coat of clear acrylic spray (Rust-Oleum Crystal Clear works well). For painted designs, prime with a filler primer, paint with acrylics, and seal with clear coat for durability.

A custom phone case takes 2-4 hours to print and costs $0.50-1.50 in material. Once you have the CAD model dialed in for your phone, creating new designs is just changing the back panel artwork, the structural shell stays the same. It's a project that pays for itself if you enjoy changing cases regularly or want to make personalized gifts.

For more practical project tutorials, check out our best functional prints and TPU printing guide.

Thinking about selling your designs? Read our guide to selling 3D prints on Etsy, phone cases are one of the top-selling product categories.

Published by the 3D Printer Stuff editorial team. Published November 17, 2026.

Editorial responsibility: see Imprint.

Spotted an error or have something to add? corrections@3dprinterstuff.com

Share with fellow makers:
tutorialphone-casetpuprojectsfunctional
πŸ“–

Explore more

All articles on 3D Printer Stuff β†’

πŸ”§

Maker Tips, Delivered

New guides, filament tests, and project ideas β€” every week in your inbox.

🎁 Free bonus: 3D Printing Starter Checklist (PDF)

🧭Part of our topic hub: Filaments & Materialsβ†’

You might also like

Comments (0)

Leave a comment

Comments are reviewed before publishing.