This page may contain affiliate links. If you make a purchase through these links, we may earn a small commission at no extra cost to you. This helps us keep creating free content.
Upgrades & compatible parts for the Ender 3 V2
The Ender 3 V2 (Creality, 2020) has a 220×220 mm bed, a bowden setup and a bedslinger design. Those specs decide what fits. Here's the matching upgrade and spare-parts list — free printable mods and buyable parts.
PEI spring-steel build plate
Look for a 220×220 mm spring-steel plate — that exact size is what fits.
Nozzles (brass / hardened)
Uses the standard MK8 / M6 nozzle — the cheapest, widest selection (brass, hardened steel, ruby).
Hotend / high-flow upgrade
All-metal or high-flow (CHT/Volcano) hotends boost speed and let you print high temps — popular on this printer.
Extruder & drive gears
A dual-gear or direct-drive conversion is the single biggest quality upgrade for this bowden machine.
Part-cooling fan duct
Enclosure
An enclosure keeps ABS/ASA warp-free and cuts noise — ready-made tents and printed panels both work.
Bed springs / silicone spacers
Swap stock springs for stiff yellow springs or silicone spacers to stop the bed drifting out of level.
Spool holder
Tons of printer-specific holders exist — from simple arms to bearing-mounted spinners.
Filament runout sensor
A filament runout sensor saves long prints from running dry — easy add-on.
Belt tensioner
A printed X/Y belt tensioner removes belt slack and tightens up your dimensions — cheap, high impact.
Cable chain / management
Tidy the wiring and protect it from snags — a satisfying first print upgrade.
Filament (PLA / PETG)
The one thing you'll buy again and again — match diameter (1.75 mm) and dial temps to the brand.
Buy links are affiliate links — as an Amazon Associate we earn from qualifying purchases. Printable links go to Printables (we don't host STLs).
Different printer? Use the interactive finder.
Open the Upgrade Finder →