This page may contain affiliate links. If you make a purchase through these links, we may earn a small commission at no extra cost to you. This helps us keep creating free content.
Upgrades & compatible parts for the Bambu Lab P1P / P1S
The Bambu Lab P1P / P1S (Bambu Lab, 2023) has a 256×256 mm bed, direct drive and CoreXY kinematics. Those specs decide what fits. Here's the matching upgrade and spare-parts list — free printable mods and buyable parts.
PEI spring-steel build plate
Look for a 256×256 mm spring-steel plate — that exact size is what fits.
Nozzles (brass / hardened)
The nozzle is part of the Bambu hotend assembly — buy Bambu-compatible hotends, generic MK8 nozzles do NOT fit.
Hotend / high-flow upgrade
Stick to genuine or Bambu-compatible hotends — third-party high-flow options exist but check the version.
Extruder & drive gears
Already a direct-drive extruder — upgrades are mostly hardened drive gears or a dual-gear conversion.
Part-cooling fan duct
Enclosure
An enclosure keeps ABS/ASA warp-free and cuts noise — ready-made tents and printed panels both work.
Spool holder
Tons of printer-specific holders exist — from simple arms to bearing-mounted spinners.
Filament runout sensor
Many newer models already include a runout sensor — check yours before adding one.
Belt tensioner
CoreXY machines usually have built-in belt tensioners — check before printing one.
Cable chain / management
Tidy the wiring and protect it from snags — a satisfying first print upgrade.
Filament (PLA / PETG)
The one thing you'll buy again and again — match diameter (1.75 mm) and dial temps to the brand.
Buy links are affiliate links — as an Amazon Associate we earn from qualifying purchases. Printable links go to Printables (we don't host STLs).
Different printer? Use the interactive finder.
Open the Upgrade Finder →